ISHIDA BC-4000TEC User Manual

BC-4000TEC User’s Manual No. JBAW07EBC-4000TEC
System Scale Printer
BC-4000TEC
User’s Manual
IMPORTANT
• Do not carry out installation, operation, service, or
maintenance until thoroughly understanding the
contents of this manual.
• Keep this manual available at all times for installation,
operation
, service, and maintenance.

ISHIDA BC-4000TEC Specifications

General

Max. Print Width	104 mm
Max. Print Length	999 mm
Printing Method	Thermal Transfer / Direct Thermal
Print Technology	Direct Thermal
Print Resolution	203 dpi
Interface	RS-232
Power Supply	AC 100V - 240V, 50/60 Hz
Label Thickness Range	0.06 mm to 0.25 mm

Summary

Safety Considerations

Properly Ground Machinery

Ensure safe operation by securely attaching the protective ground wire to the main grounding provision.

Do Not Remove Covers or Enclosures

Avoid personal injury and shock by keeping machine covers intact unless specified.

Do Not Perform Unspecified Maintenance

For personal safety, do not perform any maintenance procedures not detailed in the manual.

Disconnect Power Supply Before Servicing

Ensure personal safety by disconnecting the power supply before performing any servicing.

Take Precaution Against Residual Electrical Charge Hazard

Be aware that capacitors may retain electrical charge even after power disconnection.

Cautions for Installation

Cautions for Power Supply

Cautions for Handling

Chapter 2 Daily Operation

2.1 Label Setting

Step-by-step guide for loading and setting up label paper rolls.

2.2 Weighing Items

Procedures for weighing items, including PLU call-up and tare functions.

2.3 Fixed Price Items

Instructions for operating the scale with fixed-price items and issuing labels.

Chapter 3 Subtraction Mode

3.1 Item Subtraction (D01)

Details the process for performing item subtraction to adjust total data.

Chapter 4 Total Mode

4.1 Total Mode Entry/Exit (F00)

4.2 Daily Total (F01)

Procedures for generating and printing daily sales, item, and department totals.

4.3 Weekly Total (F02)

Instructions for generating and printing weekly sales, item, and department totals.

4.4 Monthly Total (F03)

Instructions for generating and printing monthly sales, item, and department totals.

4.5 Hourly Total (F04)

4.6 Operator Total (F05)

4.7 Periodical Total (F06)

4.8 Error Total (F07)

4.9 Total Clear (F08)

4.10 Error Total Clear (F09)

Chapter 5 Registration Mode

5.1 Registration Mode Entry/Exit

Steps to enter and exit the registration mode for system setup.

5.2 PLU File (P01)

Guide to setting up PLU (Price Look-Up) files, including item details and sales modes.

5.3 Commodity Name (P02)

5.4 PLU Delete (P02-03)

5.5 Price Change (P03)

5.6 Preset Key (P04)

How to allocate and configure preset keys for various functions.

5.17 Operator Name (P24)

5.20 Department Code/Name (P27)

5.21 Group Code/Name (P28)

5.22 Sale Campaign (P29)

5.23 Nutrition (P40)

Appendix

A.1 Error Code & Messages

Lists common error codes and their probable causes and recommended measures.

A.2 Communication Problems

Troubleshooting guide for communication errors and network settings.