ISHIDA BC-4000TEC - 4.7 Periodical Total (F06)

Chapter 4 TOTAL MODE
4.7 PERIODICAL TOTAL (F06)
1
[F01 Screen]
Make sure that “Daily Total” screen (F01)
appears on the display.
Otherwise, access this screen by referring
to Section 4.1: Total Mode Entry/Exit.
2
[Periodical Total]
Press the [ ↓ ] key five times, or key in “6”
and press the [ ↓ ] key to access “Periodical
Total” screen (F06).
or
d
3
[Periodical Total Print]
Press [ENTER] key to proceed to
“Periodical Total Print” screen (F06-01).
Press the [PRINT] key to issue a periodical
total label.
• Printing starts from the first PLU number
with total data.
• To stop printing before completion, press
the [ZERO] key.
Note: If the Total Report on labels contains
many items, do not thread paper on to the
winding bobbin. Allow labels to remain on
backing paper.
d
d
4
[F01 Screen]
Press the [END] key to return to the F01
screen.
d
5
[Total Mode Exit]
To exit Total Mode, press the [MODE] key.
The initial display will appear.
d
4-14 BC-4000TEC User’s Manual No. JBAW97EBC-4000TEC