To Next PageTo Next Page
Need help?Do you have a question about the Ismatec ISM931 and is the answer not in the manual?
General| Type | Peristaltic Pump |
|---|---|
| Number of Channels | 1 |
| Control | Manual |
| Operating Modes | Continuous |
| Tubing Compatibility | Various, depending on pump head |
General safety advice and user responsibilities for operating ISMATEC® pumps.
Details warranty period, exclusions, and conditions for ISMATEC® pumps.
Explains the function of each button on the pump's control panel.
Explains the different pump operating modes (PUMP% Flow rate, DISP Volume, etc.).
How to select and set desired flow rates and use MAX key.
Step-by-step guide to calibrate the pump's flow rate for accuracy.
How to select and set the pump's drive speed.
How to set the desired volume for dispensing.
Step-by-step guide to calibrate the dispensed volume for accuracy.
How to set the desired time for dispensing.
How to dispense a specific volume within a defined time interval.
How to set up dispensing with pauses based on volume.
How to set up dispensing with pauses based on time.
What to do when the pump is overloaded and how to restart safely.
General command syntax, overload reset, and basic pump control commands.
