Ismatec ISM937 User Manual

FRANÇAISENGLISHDEUTSCH
Hochpräzise
Schlauchpumpe
mit Planetenantrieb
IPC
4 KanäleI SM930
8 KanäleI SM931
12 KanäleI SM932
16 KanäleI SM933
24 KanäleI SM934
IPC-N
4 KanäleI SM935
8 KanäleI SM936
12 KanäleI SM937
16 KanäleI SM938
24 KanäleI SM939
High precision
Tubing Pump
with planetary drive
IPC
4 Channels ISM930
8 Channels ISM931
12 Channels ISM932
16 Channels ISM933
24 Channels ISM934
IPC-N
4 Channels ISM935
8 Channels ISM936
12 Channels ISM937
16 Channels ISM938
24 Channels ISM939
Pompe
péristaltique
de haute précision, avec
entraînement planétaire
IPC
4 Canaux ISM930
8 Canaux ISM931
12 Canaux ISM932
16 Canaux ISM933
24 Canaux ISM934
IPC-N
4 Canaux ISM935
8 Canaux ISM936
12 Canaux ISM937
16 Canaux ISM938
24 Canaux ISM939
Operating Manual Mode d‘emploiBetriebsanleitung

Ismatec ISM937 Specifications

General

Type	Peristaltic Pump
Motor Type	Stepper motor
Power Supply	100-240 VAC, 50/60 Hz
Control	Manual or Remote
Operating Modes	Continuous
Communication Interface	RS-232

Summary

Safety Precautions

General Safety Guidelines

Outlines general recommendations and responsibilities for safe operation.

Specific Hazard Warnings

Highlights risks like pinching, crushing, and electrical shock.

Warranty Information

Warranty Terms and Conditions

Details warranty coverage, exclusions, and claim procedures.

Rear Panel and Connections

Rear Panel Component Identification

Voltage Setting and Fuse Replacement

Pump Startup Procedure

Operating Panel and Controls

Control Panel Layout and Functions

Explains the function of each button and display element on the front panel.

Operating Modes and Status Indicators

Details the different operating modes and their corresponding LED indicators.

Configuring Basic Settings

Basic Settings Details

Tube, Initialization, and Address Settings

Titration, Footswitch, and Cycle Settings

Pumping by Flow Rate

Calibrating the Flow Rate

Pumping by Drive Speed

Dispensing by Volume

Calibrating the Dispensing Volume

Default Calibration Procedures

Default Calibration for Flow Rate

Default Calibration for Volume

Dispensing by Time

Volume Dispensing within a Set Time

Intermittent Dispensing by Volume

Intermittent Dispensing by Time

Pump Operational Limits and Idle Mode

Pumping Against Pressure

Overload Protection

Analog Interface Operation

Analog Interface Overview and Pin Assignments

Description of the analog interface and pin functions (1-7).

Speed Control and Roller Count Outputs

Details pin functions related to speed control, roller count, and internal speed.

Switch Settings for Control

DIP Switch S1 Configuration

Sliding Switch S2 Functionality

Serial Interface Communication

Interface Setup and Addressing

Connecting the pump via RS232 and setting the pump address.

Command Structure and Protocol

Format of commands, parameters, and response codes.

Key Command Categories

Preparing Cassettes with Pressure Lever

Maintenance, Disposal, and Specifications

Technical Specifications Overview

Summary of key technical specifications like differential pressure, voltage, power.