To Next PageTo Next Page
Need help?Do you have a question about the Ismatec IPC series and is the answer not in the manual?
Overview of the high-precision tubing pump with planetary drive.
Important safety instructions for operating the pump, including general warnings.
Warnings regarding pinch hazards from rotating parts and electrical shock risks.
Details on warranty coverage, duration, and conditions for invalidation.
Information displayed during the initial pump start-up sequence.
Explanation of the LED display and basic buttons like RUN/STOP, Increase/Reduce Value.
Details on RUN/STOP, standby function, MAX/CAL, and rotation direction controls.
How to change modes and interpret active mode LEDs (Flow Rate, Volume, Time).
Steps for selecting tubing ID and resetting all basic settings to default.
Pin for internal speed control, function depends on analog interface activation.
Input pin for external speed control via analog signals.
Settings for DIP switch S1, affecting analog inputs and outputs.
Commands for setting dispensing time, roller steps, and speed adjustments.
Commands for setting dispensing volume, total volume, and number of cycles.
Commands for starting, stopping, and controlling pump rotation direction.
Summary of the pump's technical specifications.
General| Type | Peristaltic Pump |
|---|---|
| Motor Type | Stepper motor |
| Operating Temperature | 5 - 40 °C |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Control | Digital, RS-232 interface |
| Tubing Compatibility | Various tubing sizes (0.13-4.8 mm ID) |
| Dimensions (W x H x D) | Varies depending on the model. Example: IPC8: 235 x 140 x 250 mm |
| Weight | Varies depending on the model. Example: IPC8: 4.2 kg |
