To Next PageTo Next Page
Need help?Do you have a question about the Ismatec Reglo ICC and is the answer not in the manual?
Key safety advice including pinch point warnings, operational limits, and proper usage.
Details the Reglo ICC pump's intended use and items included in the package.
Identifies and describes the various ports on the pump's rear panel.
Explains the pump's control buttons, LCD display, and interface icons.
Guides on changing parameters and navigating the pump's menu structure.
Details the Status and Pumping menus and their functions.
Explains various pumping modes like Flow Rate, Volume, and Time.
Covers complex modes like Volume/Time with Pause and Time with Pause.
Configures tubing ID, backsteps, and covers Disabled Mode.
Step-by-step guide for calibrating individual pump channels.
Adjusts language, resets defaults, and guides tubing installation.
Displays remote mode and temperature alarm status.
Specifies the maximum allowable differential pressure for pump operation.
Advice on releasing tubing cassettes when the pump is idle to prolong service life.
Details the pump's overload protection and circuit breaker.
Describes available cassette types, spare parts, and material properties.
Step-by-step guide for installing and adjusting pressure lever cassettes.
Important considerations for using pressure lever cassettes.
Procedures for cleaning the pump head and proper product disposal.
Details motor, flow rate, pressure limits, and remote control interfaces.
Covers power connection, operating conditions, and physical dimensions/weight.
Lists CE compatibility, CSA testing, and key safety warnings like pinch points.
Defines ASCII characters, commands, and response messages for serial communication.
Commands addressed to individual pumps for parameter control.
Illustrates setting pump speed and other parameters using serial commands.
General| Brand | Ismatec |
|---|---|
| Model | Reglo ICC |
| Category | Water Pump |
| Language | English |
