To Next Page

To Previous Page

www.123filter.com | (678) 261-7611 | support@123filter.com Page

Figure 9. Installation

2. Three frame pillars

are respectively

inserted into the three

square slots of the

frame base. Screw in

the M8 bolts.

3. Put the machine

head on the three

frame pillars and

screw in the M6

screws.

1. Four Omni wheels

4. Install PP and

CTO in order from

right to left.

Wrench for tightening the

housing

5. Install the water

outlet component on

the water outlet of the

RO membrane.

Blue pure water tube,

connect to the 3/8'' quick

connect fitting.

White drain line

Pure water outlet,

connect to water-

using equipment such

as a pure water faucet.

Wastewater outlet,

connect to the sewage

drain.

6. Connect the water

inlet to the water supply

pipe.

Ispring CRO1000 User Manual

Questions and Answers: