Ispring DS4S User Manual

Control Panel LED Light Functions
Off Flashing Solid
1
Red LED Light
(Hot Water)
The heating system is
off.
Activate the hot water
(red) switch on the
panel (page 6 #11).
Hot water is heating.
Hot water has
reached optimum
temperature, water
ready to dispense.
2
Yellow LED
Light
(Water Level)
Water levels inside
the reservoir are low.
Check the water inlet
and the valves.
Water levels inside
the reservoir are
normal.
3
Blue LED Light
(Cold Water)
The cooling system is
off.
Connect the power
cord (page 6 #14) to an
electrical outlet.
The cooling system
is cooling.
Coldwater has
reached optimum
temperature, and the
water is ready to
dispense.
NOTE: The hot water heating system will not operate during the water level inside the
reservoir is low.
Page 7 www.123filter.com | (678) 261-7611 | support@123filter.com

Ispring DS4S Specifications

General

Brand	Ispring
Model	DS4S
Category	Water Dispenser
Language	English