Ispring DS4S User Manual

Product Operation & Specifications
Though testing was performed under standard laboratory conditions, the actual performance of the
system may vary based on local water conditions and quality.
SPECIFICATIONS
Model DS4S
Dimensions W x D x H
11.8 in. x 14.1 in. x 41.7 in.
30 cm x 35.8 cm x 106 cm
Water Inlet Temp.
40-100 °F
Heating Temp (approx.).
194 °F / 90 °C
Cooling Temp (approx.).
41-48 °F / 5-9 °C
Heating Power Consumption
500 W
Cooling Power Consumption
85 W
Filters
Stage
Model
Purpose
Life
1
st
FPDS:
PP Filter
High-capacity polypropylene filter.
Made with food-grade polypropylene micro-fibers.
Removes sediment, dirt, sand, silt, rust, and scale particles.
3 - 6
mo.
2
nd
FGKDS:
GAC+KDF
Compound
Filter
Made with high-quality KDF and granular activated carbon.
Reduces chlorine, lead, hydrogen sulfide, odors, and other
contaminants.
6 - 12
mo.
3
rd
FCDS:
CTO Carbon
Block Filter
Made with high-quality activated carbon.
Reduces chlorine, foul odor, and taste.
Removes sediment, dirt, sand, and rust.
6 - 12
mo.
4
th
FTDS:
Post Activated
Carbon Filter
Made with high-quality granular activated carbon.
Reduces chlorine, foul odor, and taste.
Removes sediment, dirt, sand, and rust.
6 - 12
mo.
*Filters life may varies per source water quality.
Before You Start
Failure to follow these instructions can result in death, fire, or electrical shock.
Caution
 Never allow children to dispense hot water without proper and direct supervision.
 Do not plug in or turn on the water dispenser unless there is water in the system.
 Refrigerants must be handled and disposed of by qualified service personnel only. Before
discarding this water dispenser to landfill, contact local authorities for advice on proper disposal
methods for refrigerants.
www.123filter.com | (678) 261-7611 | support@123filter.com Page 4

Ispring DS4S Specifications

General

Brand	Ispring
Model	DS4S
Category	Water Dispenser
Language	English