Engine Control System (4HK1) 1A-341
23
1. Reconnect all previously disconnected
components, fuse or harness connector(s).
2. Start the engine.
3. Observe the DPD Switch parameter with a
scan tool.
Does the scan tool indicate ON and OFF with
each switch transition?
—
Go to Step 4 Go to Step 15
Step Action Value(s) Yes No
LG4HKED-WE-0871.book 341 ページ ２００７年１１月２９日 木曜日 午後６時２９分
To Next Page
Loading...