Isuzu 2008MY N Series User Manual

1A-42 Engine Control System (4HK1)
Total Intake Air Temperature
Overtemperature Event
Counter Varies Varies
DPD Mode Varies 30 30
DPD Accumulation Status 0/ 1/ 2/ 3/ 4/ 5 0, 1, 2, 3 or 4 0, 1, 2, 3 or 4
DPD Distance Status 0/ 1/ 2/ 3/ 4 0, 1, 2 or 3 0, 1, 2 or 3
DPD Incomplete
Regeneration Status
0/ 1/ 2 0 or 1 0 or 1
DPD Insufficient Regeneration
Status
0/ 1/ 2 0 or 1 0 or 1
DPD Regeneration Switch On/ Off Off Off
Exhaust Differential Pressure kPa/ psi Varies Varies
Exhaust Differential Pressure
Sensor
Volts Varies Varies
Exhaust Temperature 1 °C/ °F Varies Varies
Exhaust Temperature Sensor
1
Volts Varies Varies
Exhaust Temperature 2 °C/ °F Varies Varies
Exhaust Temperature Sensor
2
Volts Varies Varies
Exhaust Throttle Status On/ Off Off Off
Immobilizer Function
Programmed
Yes/ No Yes Yes
Wrong Immobilizer Signal Yes/ No No No
Immobilizer Signal Yes/ No Yes Yes
Security Wait Time Inactive/ Time
(hour: minute:
second)
Inactive Inactive
Scan Tool Parameter Units Displayed Typical Data Value at Engine
Idle
Typical Data Value at 1700
RPM
LG4HKED-WE-0871.book 42 ページ ２００７年１１月２９日 木曜日 午後６時２９分

Isuzu 2008MY N Series Specifications

General

Brand	Isuzu
Model	2008MY N Series
Category	Control Systems
Language	English