Isuzu 4LE2 - Daily (Pre-Operating) Inspection

5-4
INSPECTION AND MAINTENANCE
Daily (Pre-Operating) Inspection
Perform the daily inspection once per day before
starting the engine to confirm that there is no
abnormality. For safe and problem-free engine
operation, confirm conditions during engine
operation, and perform inspections at appropriate
intervals. Also, perform maintenance operations
in accordance with the inspection results.
When an inspection reveals an abnormality or
when an abnormality was found while operating
the engine on the previous day or time, have the
machine repaired at an Isuzu Distributor before
the next operation.
Daily (Pre-Operating) Inspection List
[1. Inspecting components that showed abnormalities during the previous
operation]
Inspection Item Reference Page
Inspecting components that showed abnormalities during
previous operation
5-5
[2. Inspecting each part of the engine]
Inspection Item Reference Page
Battery fluid level* 5-34
Looseness and corrosion in terminal section of battery 5-35
Engine oil level and contamination* 5-7
Coolant level* ―
Water removal from fuel 5-22
Leakage of fuel, engine oil and coolant ―
Presence or nonpresence of engine failure indication ―
Generator drive belt tension and damage* 5-13
[3. Starting the engine]
Inspection Item Reference Page
Engine startability and presence or nonpresence of abnormal
noise*
5-5
Color of exhaust smoke 3-6
* : These are inspection items that should be performed at appropriate intervals
determined based on operation hours, running conditions, etc.
IDE-6450A4500781ALL.indd5-4IDE-6450A4500781ALL.indd5-4 2014/04/1814:19:582014/04/1814:19:58