Isuzu 4LE2 - Main Data and Specifications; Engine Data

7-2
MAIN DATA
Main Data and Specifications
Engine
AP-4LE2
Specifications
4-cycle, Water-cooled type, In-line four-cylinder, Overhead valve type, Intercooler specification,
Turbocharger equipped engine
Number of cylinders - Inner diameter x Travel
mm (in) 4 - 85 × 96 (3.35 × 3.78)
Compression ratio* (to 1) 17.6
Displacement cc (cu. in) 2,179 (133)
Combustion chamber type Direct injection type
Ignition order 1-3-4-2
Rated output (without fan)* kW (hp)/min
-1
43 (57.7) / 2000
Maximum torque (without fan)* N·m (lb·ft)/min
-1
215 (158.4) / 1800
Supercharging system Turbocharger (IHI, RHF3V)
Valve clearance mm (in) Intake, Exhaust: 0.40 (0.016) in cold engine
Fuel type Diesel fuel (JIS K2204)
Injection pump type Denso, Common rail type
Injector type Porous type (electronically controlled)
Governor type* Electronically controlled type
Engine oil capacity [Reference value]*
liters (US gal./lmp gal.) Approx. 7.6 - 10.4 (2.0 - 2.7 / 1.7 - 2.3)
Coolant capacity (engine only)
liters (US gal./lmp gal.) Approx. 4.1 (1.1 / 0.9)
Generator* volt/amp. Nikko 24 / 50, Hitachi 12 / 35
Starter motor* volt-kw Mitsubishi 24 - 3.2, Mitsubishi 12 / 2.2
This specification is subject to change in part without notice.
*: Specification may vary depending on the machine, so refer to the specifications of
the machine manufacturer.
IDE-6450A4500781ALL.indd7-2IDE-6450A4500781ALL.indd7-2 2014/04/1814:20:102014/04/1814:20:10