56
Engine oil draining
WARNING:
To help avoid the damage of being burned, do not drain oil
while the engine is still hot.
One-touch type
1) Wipe clean around the oil filler cap taking care so that no foreign
particles entry. Remove the filler cap.
2) Loosen the cap of oil drain cock and remove it. Connect the oil drain
hose to the oil drain cock and drain the oil.
3) After the completion of draining, disconnect the hose and wipe off the
oil on the drain cock.
4) Turn the cap of oil drain cock slightly and settle it. From that position,
turn more about 60 to 90 degrees.
Oil filler cap
IMLE0093
IMWG0035
To Next Page
Loading...
