ItaldibiPack Leo - M Achine Manufacturer Identification Data and Location of CE Nameplate

Il presente manuale è di proprietà di ogni riproduzione, anche parziale, è vietata.
LEO Instructions
Edition: 01/2016 - Revision: 01/16
1 - 04
General instructions and warnings
Machine manufacturer identication data and location of nameplate
IdenticationofITALDIBIPACK S.p.A. as the
manufacturerofthemachineisconrmedincompliance
with the statutory legislation by means of the following
deeds:
- Declaration of conformity
- CE marking
- Instruction manual
The CE
plateisafxedtothemachinecolumnas
shownbelowandalongside,anditbearsindelible
informationconcerningthemachineCE MARK.
The related “CE DECLARATION OF CONFORMITY”
isincludedintheannexes.
It is prohibited to remove the “CE MARK”
plateand/orexchangeitwiththeplatesofother
machinesofthesamemodelsuppliedtothecustomeroroperator.
If the “CE MARK”platebecomesdamagedordetachedfromthemachine,thecustomer
must inform ITALDIBIPACK S.p.A.
MANUFACTURER'S IDENTIFICATION DATA
ITALDIBIPACK S.p.A.
Via Europa 35 - 20010 POGLIANO MILANESE (MI) - Italy
Tel. +39 02 9396461 - Fax +39 02 93549494
www.italdibipack.com-info@italdibipack.com