1
2
3
4
5
7
8
BACK PANEL
CONNECTIONS
SPECIFICATIONS
DIMENSIONAL
DESCRIPTION
FEATURES
FRONT PANEL
CONTENT
TTENTION: This unit must be protected from moisture because of the risk of
fire and the possibility of electrical shock.
1. Make sure that you have the correct mains voltage. Only operate the unit at the
mains voltage marked on the rear panel.
2. Make sure that nothing, especially metal objects, are inserted into the
amplifier. This could result in a severe electric shock or malfunction.
3. If the unit is subjected to extreme fluctuations of temperature, e.g. on being
transported from outside into a heated room, condensation can form. The unit
should not be used until it has reached room temperature.
4. In the event of water or any other fluid being accidentally spilt on the unit,
switch the unit off immediately and send it to a qualified service workshop for
inspection.
5. Make sure that the unit is always well ventilated and never exposed to direct
sunlight.
6. Do not use sprays to clean the unit as they have a detrimental effect on the unit
and Could ignite ITC denly.
WARNING
To Next Page
Loading...
Need help?
General
