ITech IT6005C-80-150

Technical Specification
Parameter IT6010C-80-300
Resistance ≤1% + 1%FS
Read Back Accuracy Voltage
≤0.02% +0.02%FS
( within 12 months, 25℃
±5℃)
Current ≤0.1% + 0.1%FS
±(％of Output+Offset)
Power ≤0.5% + 0.5%FS
Resistance ≤1% + 1%FS
Ripple Voltage ≤120mVpp(MAX:≤300mVpp)
(20Hz -20MHz)
Current ≤0.1%FS RMS
Setup Temperature
Coefficient
Voltage
≤50PPM/℃
±(％of Output/℃+Offset)
Current ≤200PPM/℃
Read Back Temperature
Coefficient
Voltage
≤50PPM/℃
±(％of Output/℃+Offset)
Current ≤200PPM/℃
Rise Time( no load ) Voltage
≤15ms
Rise Time( full load ) Voltage
≤30ms
Fall Time( no load ) Voltage
≤30ms
Fall Time( full load ) Voltage
≤15ms
Transient Response Time Voltage
≤2ms
AC Input
Voltage (Three-
phase four-wire) 1
198V～264V (Derating 50%) 342V～528V
Maximum Input
Current
L1,L2/17A;L3/29A
Maximum Input Ap-
parent Power
11.3kVA
Frequency
47Hz～63Hz
Setup Stability-30min Voltage
≤0.02%+0.02%FS
±(％of Output+Offset)
Current ≤0.1% + 0.1%FS
Setup stability-8h Voltage
≤0.02%+0.02%FS
±(％of Output+Offset)
Current ≤0.1% + 0.1%FS
Readback Stability-30min Voltage
≤0.02%+0.02%FS
±(％of Output+Offset)
Current ≤0.1% + 0.1%FS
Readback stability-8h Voltage
≤0.02%+0.02%FS
±(％of Output+Offset)
Current ≤0.1% + 0.1%FS
Efficiency
～90%
Copyright © Itech Electronic Co., Ltd.
200