ITech IT6015C-80-450S

Technical Specification
Parameter IT6010C-80-300
Ripple Voltage ≤120mVpp(MAX:≤200mVpp)
(20Hz -20MHz)
Current ≤0.1%FS RMS
Setup Temperature
Coefficient
Voltage
≤50PPM/℃
(％of Output/℃+Offset)
Current ≤200PPM/℃
Read Back Temperature
Coefficient
Voltage
≤50PPM/℃
(％of Output/℃+Offset)
Current ≤200PPM/℃
Rise Time( no load ) Voltage
≤15ms
Rise Time( full load ) Voltage
≤30ms
Fall Time( no load ) Voltage
≤30ms
Fall Time( full load ) Voltage
≤15ms
Transient Response Time Voltage
≤2ms
AC Input
Voltage
198V～264V (Derating 50%) 342V～528V
(Three-phase four-wire)
Maximum Input
Current
L1,L2/17A;L3/29A
Maximum Input Ap-
parent Power
11.3kVA
Frequency
47Hz～63Hz
Setup Stability-30min Voltage
≤0.02%+0.02%FS
±(％of Output+Offset)
Current ≤0.1% + 0.1%FS
Setup stability-8h Voltage
≤0.02%+0.02%FS
±(％of Output+Offset)
Current ≤0.1% + 0.1%FS
Readback Stability-30min Voltage
≤0.02%+0.02%FS
±(％of Output+Offset)
Current ≤0.1% + 0.1%FS
Readback stability-8h Voltage
≤0.02%+0.02%FS
±(％of Output+Offset)
Current ≤0.1% + 0.1%FS
Efficiency
～90%
Remote Sense Compensa-
tion Voltage
≤2V
Command Response Time
2mS
Power Factor 0.99
Storage Temperature
-10℃～70℃
Copyright © Itech Electronic Co., Ltd.
161