Quick Reference
Manual: manually configure the
address of the instrument.
• IP: 0.0.0.0
Set the IP address.
• Mask: 0.0.0.0
Set the subnet mask.
• Gateway: 0.0.0.0
Set the gateway address.
• DNS1: 0.0.0.0
Set the preferred address
of the DNS server. If it is not
involved, there is no need
to set it.
• DNS2: 0.0.0.0
Set the DNS server alter-
nate address. If it is not in-
volved, there is no need to
set it.
• Socket Port: 30000
Set the port number.
Serv-Conf
Configure the LAN services.
MDNS: MDNS service state.
• On
• Off
PING: PING service state.
• On
• Off
Telnet-scpi: telnet-scpi service
state.
• On
• Off
Web: Web service state.
• On
• Off
VX-11: VX-11 service state.
• On
• Off
Raw-socket: Raw-socket serv-
ice state.
• On
Copyright © Itech Electronic Co., Ltd.
13
To Next Page
Loading...
