Power Supply Function
12V
Select the 12V automotive short-
time voltage drop waveform
24V
Select the 24V automotive short-
time voltage drop waveform
Reset-Test
This test is applicable to equipment with re-
set function.
Usmin
The minimum supply voltage Us-
min (Usmin≤80V)
Starting-
Profile
This test verifies the behavior of a DUT dur-
ing and after cranking.
12V
Select the 12V test system.
1
Select the voltage/duration
of 12V starting profile cor-
responding to Level 1.
2
Select the voltage/duration
of 12V starting profile cor-
responding to Level 2.
3
Select the voltage/duration
of 12V starting profile cor-
responding to Level 3.
4
Select the voltage/duration
of 12V starting profile cor-
responding to Level 4.
24V
Select the 24V test system.
1
Select the voltage/duration
of 24V starting profile cor-
responding to Level 1.
2
Select the voltage/duration
of 24V starting profile cor-
responding to Level 2.
3
Select the voltage/duration
of 24V starting profile cor-
responding to Level 3.
Load-Dump Load dump curve
Copyright © Itech Electronic Co., Ltd.
75
To Next Page
Loading...
