ITech IT6015C-80-450S User Manual

Power Supply Function
• Standards for 12V system:
Curve should be selected based on actual test requirements. To create
waveform within 12V, follow the set standards as below:
I, II, III, and IV defined in the above standard correspond to levels 1, 2, 3,
and 4 in the setup menu.
• Standards for 24V system:
How to recall this waveform from menu (take 12V system as an example):
Copyright © Itech Electronic Co., Ltd.
79

ITech IT6015C-80-450S Specifications

General

Brand	ITech
Model	IT6015C-80-450S
Category	Power Supply
Language	English