ITech IT6800B Series - Trigger Commands

Trigger Commands
Copyright © Itech Electronic Co., Ltd. 17
Chapter4 Trigger Commands
TRIGger
This order is used to generate a trigger signal when trigger source is in BUS
mode. The function of this order is similar to *TRG.
Order syntax
TRIGger[:IMMediate]
Parameters
none
Related orders
*TRG
TRIG:SOUR
TRIGger:SOURce
This order is used to choose the source of trigger signal. Power supply can
receive the signal from front panel i.e by pressing Trigger button, or receive a
trigger signal by BUS. When you execute order *RST, the trigger mode should
be set in MANUAL.
Order syntax
TRIGger:SOURce <mode>
Parameters
BUS|MANUAL
Query syntax
TRIGger:SOURce?
*RST value
MANUAL