ITech IT6800B Series - List:load; List:repet

List Commands
Copyright © Itech Electronic Co., Ltd. 31
Order syntax
[SOURce:]LIST:SAVE <NR1>
Parameters
0 to 8
Example
LIST:SAVE 1 //save the edited list file to the first set of memory region
LIST:LOAD
This order can recall the list file saved before from specified memory region.
Sending query orders can inquire which group file you have recalled.
Order syntax
[SOURce:]LIST:LOAD[:IMMediate] <NR1>
Parameters
0 to 3
Example
LIST:LOAD 1
Query syntax
LIST:LOAD[:IMMediate]?
LIST:REPet
This order can set the repeat count of LIST steps.
Order syntax
[SOURce:]LIST:REPet <NR1>
Parameters
1 to 65535
Query syntax
LIST:REPet?