ITech IT6800B Series - List:timer; List:save

List Commands
Copyright © Itech Electronic Co., Ltd. 30
Parameters
MIN to MAX
Unit
A
Example
LIST:CURR 1,3A // set the first step’s current to be 3A.
Query syntax
LIST:CURRent?
Example
LIST:CURR? 1 // inquire the first step’s current.
Return parameters
<NR2>
LIST:TIMEr
This order is used to set the steps of list file and delay time of current step.
Order syntax
[SOURce:]LIST:TIMEr
Parameters
0.1 to 99999.9
Unit
S
Example
LIST:TIME 1,3
Query syntax
LIST:TIMEr?
Example
LIST:TIME? 1
Return parameters
<NR2>
LIST:SAVE
This order is used to save the list file to specified memory region.