IEEE488.2 Common Order
Copyright © Itech Electronic Co., Ltd. 38
Reference order
*ESE
*SRE
STAT:OPER:ENAB
STAT:QUES:ENAB
*RST
This order reset the power supply to default setting.
Order syntax
*RST
Parameter
None
*SRE <enabled value >
This order can set the parameter of status bit enable register. When query
status bit enable register, the power will return a decimal number, this
number is the binary weighted of enable register.
Order syntax
*SRE <NRf>
Parameter
0~255
Reset value
Consult *PSC order
Example
*SRE 128
Quest syntax
*SRE?
Return parameter
<NR1>
Reference Order
*ESE
*ESR?
*PSC
*STB?
To Next Page
Loading...
