Error Messages
Copyright © Itech Electronic Co., Ltd. 118
Execution Errors –200 through –299 (sets Standard Event Status Register bit #4
EXE)
Error Error String
–200 Execution error [generic]
–221 Settings conflict [check current device state]
–222 Data out of range [e.g., too large for this device]
–223 Too much data [out of memory; block, string, or expression too
long]
–224 Illegal parameter value [device-specific]
–225 Out of memory
–270 Macro error
–272 Macro execution error
–273 Illegal macro label
–276 Macro recursion error
–277 Macro redefinition not allowed
System Errors –300 through –399 (sets Standard Event Status Register bit #3
DDE)
Error Error String
–310 System error [generic]
–350 Too many errors [errors beyond 9 lost due to queue overflow]
Query Errors ¨C400 through ¨C499 (sets Standard Event Status Register bit #2)
Error Error String
-400 Query error [generic]
-410 Query INTERRUPTED [query followed by DAB or GET before
response complete]
-420 Query UNTERMINATED [addressed to talk, incomplete
programming message received]
-430 Query DEADLOCKED [too many queries in command string]
-440 Query UNTERMINATED [after indefinite response]
Selftest Errors 0 through 99 (sets Standard Event Status Register bit #3)
Error Error String
0 No error
1 Module Initialization Lost
To Next Page
Loading...
Need help?
General
