ITS Telecom EAR 1000 - Advanced Features

DTMF Programming
4.2.5 Advanced Features
OPERATION COMMAND DEFAULT
Time for End Of Message
action.
*105 + XX + Y + #
where
XX = Script message number (Same
as *100)
Y = 0-9 (sec)
5
Selecting DTMF code or
Call Progress tone
detection. This command is
valid in Supervised transfer
mode.
*220 + X
where
X = 0; Busy/Answer detect using Call
Progress tones.
X = 1; Busy/Answer detect using
DTMF codes.
Note: Option X=1 is valid only if the
ports assigned to the Ear 1000/2000
in the PBX are defined as VM ports.
Call Progress
4-10 EAR 1000/2000 Installation and Programming Manual