ITS Telecom EAR 1000 - Greeting Handling

DTMF Programming
9.2.3 Greeting Handling
OPERATION COMMAND DEFAULT
Transfer a call to an
extension at the end of the
Opening Greeting.
*120 + XX + * + Ext. + #
where:
XX = Opening Greeting number
(same as *100)
Ext = Extension (contains up to six
digits).
Transfer the call to the
operator’s ext. at the end
of the Opening Greeting.
Operator Ext. Is defined by
command *360
*125 + XX + #
where:
XX = Opening Greeting number
(same as *100)
Disconnect the call at the
end of the Opening
Greeting.
*140 + XX + * + #
where:
XX = Opening Greeting number
(same as *100)
Reset Opening Greeting to
default values. This
command does not delete
the recorded script
messages.
*190 + XX + #
where
XX = Opening Greeting number
(same as *100)
9-6 ADRA 1000/2000 Installation and Programming Manual