ITS Telecom EAR 1000 - Busy Menu Handling

DTMF Programming
9.2.4 Busy Menu Handling
OPERATION COMMAND DEFAULT
Place a call on hold at the
end of a BUSY greeting
message (script 22).
Enables the call to remain
on hold. The caller is put on
hold for 10 seconds before
trying to transfer the call
again.
*180 + *
where:
* = Puts the call on hold at the end of
a Busy greeting message
Blind Transfer to a busy
extension. An immediate
attempt is made to transfer
the call to the extension.
*185 + *
Blind transfer at the end of a Busy
greeting message (script 22).
ADRA 1000/2000 Installation and Programming Manual 9-7