DTMF Programming
9.2.2 PBX Parameters
OPERATION COMMAND DEFAULT
Number of rings before
line is answered.
*310 + X + Y
where:
X = Line number (1 or 2)
Y = Number of rings (1-9)
Line 1 Y = 1
Line 2 Y = 2
Non/Semi/Supervised
transfer.
Note: When the required
extension is the Operator or
another extension.
*350 + X + Y
where:
X = 1; For all extensions except the
operator’s extension.
X = 2; Operator extension only
Y = 0; Non-supervised.
Y = 1; Semi-supervised.
Y = 2; Supervised
All Ext. Non-
supervised.
Operator extension
number.
*360 + X + Ext. + #
where:
X = 1; Day operator
X = 2; Night + Holiday operators
Ext. = Operator Ext. number
Ext. = 0
9-4 ADRA 1000/2000 Installation and Programming Manual
To Next Page