DTMF Programming
OPERATION COMMAND DEFAULT
Play an Opening
Greeting.
*101 + XX
where:
XX = Opening Greeting (same as
*100)
Delete an Opening
Greeting.
*102 + XX
where:
XX = Opening Greeting (same as
*100)
Define the set of greetings
to be used when the
second line is called.
Note: For ADRA 2000 only.
*112 + X
where:
X = 0; Uses greeting No. 00, 10, 20
for both lines.
X = 1; Uses greeting No. 00, 10, 20
for line 1 and 50, 60, 70 for line 2
First Set
ADRA 1000/2000 Installation and Programming Manual 9-3
To Next Page