Section 6: BoxWriter© Matrix & Elite Editor
2465-623 User Manual Rev F Page 35
Date/Time Codes
Select Configure, System, then Date/Time Codes from the menu.
Line:
Line indicates the production
line selected.
Click on the folder tabs to access
the date/time code tables. Select an
entry in the table by clicking on the
desired row. Click on
Edit to modify
the data for the selected table entry.
Click
OK to exit and save changes
or
Cancel to exit without saving
changes.
Months:
Months represents the
string values that are used in date
codes for the standard months of
the year.
Hours:
The Hours table stores the
twenty-four codes for the hours of
the day. The codes may be custom-
ized for special coding.
Quarter Hours
: The Quarter Hours’ table stores codes for 15 minute intervals.
Days:
The day table holds the value to be used for the appropriate day.
Rollover:
The time at which the
expiration and date codes will
change to a new value. The default
rollover value is midnight.
"Hold"
: Holds the Date or Expira-
tion Date until the Roll over time.
To Next Page
Loading...