EasyManuals Logo

Ivation IVALDH70PB User Manual

Ivation IVALDH70PB
4 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
d. Install the female threaded end of the
water hose into the adapter, then lead
the water hose to the floor drain or a
suitable drainage facility.
Error codes
The following codes may appear on the LED display.
AS: humidity sensor error
ES: temperature sensor error
P2: the reservoir is full or not positioned correctly
If there is an error, follow the steps below:
1. Turn off the unit
2. Check for any obstructions
3. Restart the unit. If the malfunction is still present, turn off the unit and
unplug the power cord.
4. If the error persists, contact the manufacturer, its service agents or a
similar qualified person for service.
Care and maintenance
Always turn the dehumidifier off and unplug before cleaning.
The water reservoir should be washed with fresh water every few weeks.
The air filter should be washed with clean water at least every 30 days.
When storing the unit:
After turning off the unit, wait one day before emptying the reservoir
Clean the main unit, reservoir, and air filter
Wrap the cord and bundle it with a band
Cover the unit with a plastic bag
Store the unit upright in a dry, well-ventilated place
Specifications
Rated power: 115V
Rated frequency: 60Hz
Rated current: 6.5 amps
Refrigerant: R410A/8.29oz./0.24kg
Moisture removal: 70 pints/day
EEV: 2.0L/kW.H
Design pressure:
High: 540PSIG/3.7MPa
Low: 300PSIG/2.1MPa
Water reservoir capacity: 16gal. (6L)
Customer service:
info@myivation.com
866-849-3049
Troubleshooting
Problem
Unit does not start
The unit does not dry the air
as it should
The unit is making loud noises
Frost appears on the coils
Water is spilling on the floor
Solution/Explanation
Check that the unit is plugged in.
Check the house’s fuse/circuit breaker box.
The unit has reached its preset level or the
reservoir is full.
Reservoir is not in the correct position.
Allow the unit more time to remove the moisture.
Make sure that nothing is blocking the front or back
of the unit.
Select a lower humidity setting.
Check that all doors, windows, and other openings
are securely closed.
The room temperature is too low (below 41°F; 5°C).
There is another appliance producing water vapor
in the room.
The air filter is clogged.
The unit is tilted instead of upright.
The floor surface is not level.
This is normal. The unit has an auto defrost feature.
The hose connection may be loose.
The back drain plug is removed.
4
Water hose
Female
threaded
end
Distributed by
C&A Marketing, Inc.
114 Tived Lane East
Edison, NJ 08837 USA
Europe: C&A Europe
167 Hermitage Road
Crusader Industrial Estate
London N4 1LZ
United Kingdom
info@myivaton.com
Made in China
Ivation and the Ivation logo are registered
trademarks of C&A Holdings, LLC in the U.S.
©2017 All rights reserved

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ivation IVALDH70PB and is the answer not in the manual?

Ivation IVALDH70PB Specifications

General IconGeneral
BrandIvation
ModelIVALDH70PB
CategoryDehumidifier
LanguageEnglish

Related product manuals