Why is water still collecting in the reservoir of my Ivation IVALDHG70PWP when using a hose?
If water is still collecting in the reservoir of your Ivation Dehumidifier when using a hose, it's likely that the hose isn't installed correctly. Remove and reinstall the hose to ensure a proper connection.
What to do if my Ivation IVALDHG70PWP is not operating?
Your Ivation Dehumidifier might not be operating because it's placed in an area where the temperature is not between 41°F and 90°F. Another reason could be that the water reservoir is full and needs to be emptied.
What to do if my Ivation Dehumidifier is functioning but will not start?
If your Ivation Dehumidifier is on but won't start, it might be because the desired humidity level is set higher than the current humidity level in the room. Try lowering the humidity level setting on the unit.
What to do if the reservoir light is on in my Ivation Dehumidifier?
If the reservoir light is illuminated on your Ivation Dehumidifier, it could indicate that the bucket has been removed or isn't correctly positioned. Ensure the bucket is properly placed back into its correct position.
Why is the humidity level not dropping with my Ivation IVALDHG70PWP Dehumidifier?
If the humidity level isn't dropping as expected with your Ivation Dehumidifier, several factors could be at play: * The area might be too large for the unit's capacity. * There might be a source of moisture in the area. * The air filter could be dirty and in need of cleaning. * Obstacles like furniture or curtains might be blocking the dehumidifier's airflow and should be moved. * The humidity level might be improperly set on the unit.
What to do if the power indicator is not lit when power is connected to my Ivation IVALDHG70PWP?
If the power indicator isn't lighting up when your Ivation Dehumidifier is connected, make sure the plug is firmly connected to the power source. Also, check the plug and cord for any signs of damage.
Why is my Ivation IVALDHG70PWP Dehumidifier running louder than usual?
Your Ivation Dehumidifier might be louder than usual for a few reasons. The compressor makes more noise when it starts. Also, check if the unit is placed on an uneven floor. If the problem persists, there may be an issue with the power supply, please consult with the manufacturer or a qualified professional.
Power| rated voltage | 115V |
|---|---|
| rated frequency | 60Hz |
| power input | 690W |
| rated input | 810W |
Current| current input | 6.2A |
|---|---|
| rated current | 7.2A |
Performance| rated dehumidification capacity | 70 pints/day (33.1 L/day) |
|---|---|
| effective use area | 164 ft2 (50m2) |
| set humidity range | 35% – 80% |
Weight and Dimensions| dimensions | 14.96" W x 24.02" H x 11.22" D (380 x 610 x 285mm) |
|---|---|
| net weight | 50.7 lb. (23kg) |
Covers essential safety advice for operating the dehumidifier, including electrical hazards and proper handling.
Step-by-step guide on how to safely remove, empty, and reinsert the water bucket.
Addresses issues like unit not starting, volume changes, and poor dehumidifying effect.
Resolves problems related to the power indicator, unit startup, and dehumidifying function when humidity is too high.
To Next Page