IVIEW NX-4 User Manual

NX-SERIES USER MANUAL
iView Technology
http://www.iviewtech.com
32
10 CONFIGURE DEVICES
10.1 Managing HDDs
A newly installed hard disk drive (HDD) must be first initialize before it can be used with your NVR.
Initializing the HDD will erase all data on it.
To initialize a HDD:
1. Select HDD to initialize.
2. Click the Init button.
3. Select OK button to begin initialization. After the HDD has been initialized, the status of the HDD
will change from No to Yes.

IVIEW NX-4 Specifications

General

Brand	IVIEW
Model	NX-4
Category	Network Hardware
Language	English