analog + 4Ch IP mode, and 8CH IP mode. Change the mode, system will reboot.
8. Enable Password: When enabled, the NVR will require a password to access, even for local users.
It’s advisable to enable password protection
9. Auto Lock Time: When the password protection is enabled, the NVR will automatically time-out,
where after it will ask for a password before returning to normal functioning. The Auto Lock Time
determines how long a period of inactivity will cause the NVR to lock itself again.
10. Device ID: Differentiates your NVR from other devices. If you don’t have any other NVR’s or
similar devices, then you can leave this as-is. If you’ve got multiple NVRs running on the same
network, then it’s a great idea to give each a unique ID.
11.2 User
By default, your NVR comes with one user account, the Administrator account. The Administrator user
name is admin and the password is 12345. The default password for Administrator should be changed
right away for security reasons. The Administrator has the authority to add, delete or configure
parameters for many of the system functions.
To add additional users, choose Add.
To remove a user, choose Delete.
To Next Page
Loading...
Need help?
General