3. Operation
Turning the furnace on
Connect the power cord with the wall socket.
Switch the On/Off button to position «I».
After the self-test, the display shows the home screen or the last selected program.
To change to the home screen, press the HOME key. All functions of the Programat can
be selected from this screen.
Selecting the program
Select the required program.
Loading the furnace
Open the furnace head by pressing the OPEN FURNACE HEAD key and
place the object to be fired with the firing tray in the furnace.
Starting the program
Press the START key to start the program. The LED lights up green.
The program progress is shown in the display.
At the end of the program, the furnace head opens automatically. As soon as the
OSD lights up green, the furnace is available for the next program start.
A
A
B
B
C
C
english
To Next Page
Loading...
