GB-9
ENGLISH
1
During operation, press the
PLASMACLUSTER button.
• The remote control will display “ ”.
• The blue PLASMACLUSTER lamp on the
unit will light up.
TO CANCEL
Press the PLASMACLUSTER button again.
• The PLASMACLUSTER lamp on the unit will turn
off.
NOTE:
• Use of the PLASMACLUSTER operation will be
memorized, and it will be activated the next time you
turn on the air conditioner.
• To perform the PLASMACLUSTER operation in fan
only mode, press the PLASMACLUSTER button
while the unit is not operating. The mode symbol of
the remote control will go off and the fan speed can
not be set AUTO.
SELF CLEAN operation will reduce the growth
mold fungus with Plasmacluster ions and dry
inside of the air conditioner unit. Utilize the
operation at seasonal change over terms.
1
Press the SELF CLEAN button when the
unit is not operating.
•
The remote control displays “ ”.
• The blue PLASMACLUSTER lamp on the unit
will light up.
• The unit will stop operation after forty minutes.
• The remaining operation time will be indicated
on the TEMPERATURE INDICATOR of the
indoor unit in minute decrements.
TO CANCEL
Press the SELF CLEAN button.
• The blue PLASMACLUSTER lamp on the unit will
turn off.
NOTE:
direction or timer setting during the SELF CLEAN
operation.
• Mold fungus already grown can not be eliminated by
this operation.
PLASMACLUSTER OPERATION
Plasmacluster ions released into the room are
effective against airborne contaminants, such as
mold, viruses, and allergens.
SELF CLEAN OPERATION
1
1
To Next Page
Loading...
Need help?
General
