GB-12
performed.
1
Press the MODE button and select HEAT
mode.
2
Press the ON/OFF button to start HEAT
operation.
3
• The remote control will display “ ”.
TO CANCEL
NOTE:
operation automatically selected by AUTO mode.
1
2
3
AUXILIARY MODE
Use this mode when the remote control is not
available.
TO TURN ON
Press the AUX button.
• The red OPERATION lamp ( ) on the unit will light
and the unit will start operating in the AUTO mode.
• The fan speed and temperature setting are set to
AUTO.
TO TURN OFF
Press the AUX button again.
• The red OPERATION lamp ( ) on the unit will turn
off.
AUX
To Next Page
Loading...
Need help?
General
