IVT AirModule E 9 - Basic Principles of Operation; Key and Symbol Overview

Basic principles of operation
AirModule –6 720 813 268(2014/10)
35
10 Basic principles of operation
10.1 Key and symbol overview
Fig. 34 Keys
fav
info
menu
6 720 810 300-
5
6
7
4
2
3
1
If the display is turned off, it will turn on when a key is
used and a function executed. Quickly press the selector
to turn on the display. If you don't use any keys, the
display will turn back off.
Pos. Section Designation Explanation
1 Favourites key ▶ Press this key to show favourite functions for heating/cooling circuit 1.
▶ Keep this key pressed down to change Favourites menu settings ( User interface operating instructions).
2 Extra DHW key ▶ Press this key to activate the extra DHW function ( user interface operating instructions).
3 DHW key ▶ Press this key to activate the DHW operating mode ( user interface operating instructions).
4 Menu key ▶ Press this key to enter the main menu ( user interface operating instructions).
5 Info key When a menu is shown:
▶ Press this key for more information about the selected item.
When standard display is active:
▶ Press this key to enter the information menu ( user interface operating instructions).
6 Return key ▶ Press this key to return to the previous menu or to cancel changes.
For maintenance or when an error has been detected:
▶ Press this key to switch between standard display and error message.
▶ Keep this key pressed down to switch between a menu and the standard display.
7 Selector ▶ Turn the selector to change a set value (e.g. the temperature) or to select a menu or item.
When the display is off:
▶ Press the selector to turn on the display.
When the display is on:
▶ Press the selector to open a selected menu or item, or confirm a set value (e.g. temperature) or a message, or to
close a pop-up window.
When standard display is active and the display is on:
▶ Press the selector to activate the input window for heating/cooling circuit options in the standard display (only
valid for systems with at least two heating/cooling circuits,  User interface operating instructions).
Table 12 Keys
fav
menu
info