4.1.16 Electric Actuator Fitted to International Yoke & Acromet/Prominent Vacuum Regulator
If an International yoke is used to fit the vacuum regulators (Acromet or Prominent
equipment) the support bracket simply fits between the valve body and yoke by using a small
spacer on the yoke which allows for easier fit of the bracket.
International yoke is used to
fit the vacuum regulators
(Acromet or Prominent
equipment)
For 70kg cylinders a small 20mm
spacer will be required to be used
between the yoke clamp and valve
body to allow an easy fit of the
support bracket and interconnecting
key.
If an International yoke is used to fit
the vacuum regulators (Acromet or
Prominent equipment) the support
bracket simply fits between the valve
body and yoke by using a small
spacer on the yoke which allows for
easier fit of the bracket.
For 920kg drums using vacuum
regulators (Acroment or Prominent
equipment) a small 20mm spacer
will be required to be used between
the yoke clamp and valve body to
allow an easy fit of the support
bracket and interconnecting key.
To Next Page
Loading...