j5 create JUC400 - Getting Started with MAC

WORMHOLE SWITCH USER MANUAL
10
GETTING STARTED-MAC
Follow the steps below to start the Wormhole application:
1. Connect one end of the Wormhole Switch to a standard USB
port on one of the two computers. And connect the other end of
the Wormhole Switch to a USB port on the second computer.
(Please see the pictures below)
2. When you initially connect the Wormhole Switch to the MAC
computer a window will pop up that says, “Keyboard Setup
Assistant”, simply close the window and unplug the Wormhole Switch.
Then plug the Wormhole Switch back into your MAC computer.