WORMHOLE SWITCH USER MANUAL
12
GETTING STARTED-Windows
Follow the steps below to start the application:
1. Connect one end of the Wormhole Switch to a standard USB
port on one of the two computers. And connect the other end of
the Wormhole Switch to a USB port on the second computer.
(Please see the pictures below)
2. The device will automatically start the Wormhole Switch software
installation on both computers.
3. An “AutoPlay” option window may appear. Please click on the option
“Run WKMLoader.exe”
Troubleshooting:
If auto-run is not launched, please follow the steps:
To Next Page
Loading...
