j5 create JUC400 User Manual

WORMHOLE SWITCH USER MANUAL
13
1. Insure both computers are properly connected to the USB cable.
2. Go to My Computer and double-click the j5 Wormhole
Switch icon ( ) to start the application. (See the picture below)
4. If the “User Account Control” window appears on the screen,
Click “Yes” to continue.
5. When the Wormhole Switch is connected properly the wormhole
launch page will be shown.

j5 create JUC400 Specifications

General

Brand	j5 create
Model	JUC400
Category	Switch
Language	English