English
10 MALFUNCTIONS
WARNING: The machine must be isolated from the power supply before attempting any work on it.
Should the problem persist, please contact your technician.
The machine will not start
Check the main power supply and the power supply to
Check that the selector at the rear of the machine has
been switched on.
Check that the cover is fully closed.
The 4
th
line shows
“VARIABLE SPEED DRIVE FAULT”
Shut off the power to the machine at the isolator switch,
wait 2 minutes and reset the isolator switch. If the fault is
still there when the power is switched on again, contact
your dealer.
The 4
th
line shows “COOLING FAULT” Disconnect your machine and contact your dealer.
Dashes appear instead of the clock “- - : - -
: - -”.
Set the time as indicated in the OPERATION section.
Dashes appear instead of tank
temperature “- -°”
Contact your dealer; the probe is faulty.
To Next Page
Loading...
Need help?
General