On the condition of power on, using a sharp objective
insert into the hole for 3 seconds to restore the factory
default. When the screen shows , take out the sharp
and the screen shows , then panel will display
boot screen automatically, which means resets successfully.
16
17
P57
PA0
PA1
Presser foot lifting electromagnet
protection time 100ms Delay
time of the midway press foot
lifter (ms)
0~600
1~9999
0~6000
100
5000s
50s
When the sensor is on and instant
shade the sensor, delay time of
presser footer coming down (5s)
When the sensor is on and shade
the sensor, delay time of presser
footer coming down (5s)
Parameter
range
Parameter description
Parameter
Default
Reset with one button
Operation steps:
Factory Reset
Manual Book of A4
Product Introduction
To Next Page
Loading...
Need help?
General
