Press the button , the icon display,
means that the midway press foot lifter
is on. Press the button again, the icon
not display, means the midway press
foot lifter is off.
Press , the icon display, means
that the press foot lifter after trimming is
on.
Press again, the icon not display,
means that the press foot lifter after
trimming is off.
The right thumb press the button on the lockstitch dial, the
left hand press back seam wrench slowly, the right hand rotate
stitch dial at the same time, on the clockwise direction, stitch
becomes smaller, on the counterclockwise direction, stitch
becomes larger. When adjust to the proper position, you can let
go.
: When adjusting the pitch, if not press back seam lever,
stitch dial is heavy.
Note
Picture
12
13
Stitch adjustment method
Stitch length adjustment instructions:
Automatic presser foot lifter settings
Switch of press
foot lifter
The switch of press foot lifter after
trimming:
The midway press foot lifter settings:
LED screen area
Manual Book of A4
Product Introduction
To Next Page
Loading...
Need help?
General
