MAINTENANCE & LUBRICATION CHARTS 6
en-25
6.3 MAINTENANCE CHARTS____________________________________________________
A - Add or Adjust C - Clean I - Inspect L- Lubricate R - Replace AR - As Required
* Indicates initial service for new machines.
** Sooner for dirty operating conditions.
*** Inspect visible hoses and tubes for leaks or oil marks.
**** Drain and clean fuel tank.
I - Manual grease gun with NLGI Grade 2 (Service Class
LB).
II - Engine Oil - See Section 4.4
III - Use Jacobsen hydraulic fluid: Capacity: 5 gallons
(19 Liters). Order Part No. 2500548 carton, containing
two 2-1/2 gal. (9.5 liter) bottles or Part No. 2500546
containing 5 gal. (19 liters), pail.
IV - 50/50 water ethylene glycol mix.
Recommended Service and Lubrication Intervals
Every
8-10
Hours
Every
50
Hours
Every
100
Hours
Every
250
Hours
Every
400
Hours
Every
500
Hours
Every
1000
Hours
Yearly See
Section
Lubricant
Type
Air Filter
IR**R4.4
Battery Charge
I4.9
Belts (Alternator and Deck)
I-A* I-A R 3.3
Brake
I-A* A 3.2
Cooling System
I-C-A R 4.19 IV
Electrical System
I* I 4.14
Engine Oil (Diesel)
IR*R 4.3 II
Engine Oil Filter
R* R
Fuel System
I C****
Fuel Filter
R4.6
Fuel Water Separater
I4.6
Grease Fittings - All
L6.2I
Hydraulic Hoses and Tubes
I*** I 4.12
Hydraulic Oil
I-A R 4.13 III
Hydraulic Oil Filter
I R 4.13
Interlock System
I-A
Muffler and Exhaust
I I 4.15
Radiator Screens
I-C/AR 4.19
Tires
I-A 4.16
To Next Page
Loading...
Need help?
General
