EasyManuals Logo

Jacto PJB User Manual

Jacto PJB
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
12/55
Clean the sprayer before storage. Circulate fresh water through the tank,
pump and hoses after each use. This will help remove chemical residues and
extend life of sprayer parts;
The spray lance can be conveniently stored on the clips on the side of the tank;
Nozzles and lters must be periodically cleaned or replaced. Do not clean
nozzles or lters with sharp hard objects, nor blow through them using the
mouth;
Before storage the sprayer during periods of harsh winter, in temperatures less
than 0º C, circulate fresh water through the tank, pump and hoses. Release the
trigger valve to drain all the liquid inside the sprayer. Use antifreeze if neces-
sary. Make sure there is no liquid inside the tank before you storage the sprayer
in a safe place.
WARNING!
Discard the liquid used to clean the sprayer in a proper and
approved local for this purpose. Do not contaminate the
environment.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jacto PJB and is the answer not in the manual?

Jacto PJB Specifications

General IconGeneral
BrandJacto
ModelPJB
CategoryPaint Sprayer
LanguageEnglish

Related product manuals