J-200
G. (Jets 2 icon): Displays when Jets pump 2 is on. The pump
activates for 20-minute then turns off.
H. (Temperture High Range icon): Indicates that the spa is set
to high range temperature between 80°F (26.5°C) and 104°F
(40°C).
I. (Temperture Low Range icon): Indicates that the spa is set to
low range temperature between 65°F (18.5°C) and 99°F (37°C).
J. (Set icon): Displays when in menus that require programming.
K. (Filter Cycle icons): Displays when the hot tub is running in
a filtration cycle. Either F1 (first filter cycle) or F2 (second filter
cycle).
L. (AM or PM icons): Displays only when in the Set Time Menu.
For AM setting an “A” will be shown. For PM setting a “P” will be
shown.
Operation Details
• Temperature Adjustment: Factory default setting is 100°F (38°C).
High Range 80°F (26.5°C) and 104°F (40°C)
Low Range 65°F (18.5°C) and 99°F (37°C)
• LED light system: All LED lights run for 2 hours and then
automatically shut off.
• Jets 1/Jets 2 Button Operation: Jets run for 20 minutes when
activated, then turn off automatically to conserve energy. Simply
press either jets button to continue operation for an additional 20
minutes.
• CLEARRAY Unit : Will activate anytime the low-speed pump is on.
26
To Next Page
Loading...
Need help?
General
